Choose the solution you need:

We carry products from worldwide leading companies with state-of-the-art technology. We are also involved in high-capacity research and development, clinical studies and restorative and digital solutions including digital Implantology.

  • Surgical solutions
  • Regenerative Solutions
  • Prosthetic Solutions
  • Digital Solutions
  • Electrical Motors and Micro-motors
T3 Implants

Preservation by Design ®

The T3 implant is designed to deliver aesthetic results through tissue preservation.

• Contemporary hybrid surface provided by complex multi-surface topography.

• Seal integrity provided by a stable and tight abutment/implant interface.

• Integrated platform switching.

* Product available in the Caribbean

T3® Short implants

Implant treatment options for deficiencies in vertical height.

The T3 short implant’s length and features are designed to provide an implant treatment option in some challenging clinical cases where the bone height is insufficient for standard-length implants.

•Initial bone-to-implant contact (IBIC) •Implant/abutment clamping force •Platform switching
* Product available in the Caribbean

Clinical studies on the Osseotite Surface continue to document the benefits of increased contact osteogenesis, especially in poor-quality bone.

The Osseotite Implant features an acid-etched surface designed to facilitate osseointegration.

• Numerous studies report 98%.cumulative success rates

• Facilitates the osseointegration process

• Demonstrates high implant contact with the new bone

• Human histology with demonstrated high bone-to-implant contact.

* Product available in the Caribbean and Costa Rica
Trabecular Metal™ Dental Implants

The BioBoost effect is a multiplication of naturally-occurring growth factors to deliver faster healing and earlier bone formation than with traditional implants.

RAPID RECOVERY:Accelerate recovery with a 2-week final loading protocol. RISK MANAGEMENT: Expand the treatment of poor bone and impaired healing. REVISION THERAPY: Leverage the healing in implant replacement.
Eztetic™ Implant 3.1mm

It is strong, aesthetic solution for narrow anterior. By combining an innovative implant design, a conical, double Friction-Fit™ connection and surgical protocol, 3.1-mmD Eztetic implant can deliver beautiful and long-lasting smiles.

• Cement-retained restorations

• Tissue healing, impression transfer and provisional restorations

• Adequate restorative profiles for esthetic emergencies

• MTX surface for increased bone apposition

Tapered Screw-Vent® Implants

The Tapered Screw-Vent (TSV) implant has earned the trust of thousands of surgeons throughout the world for delivering successful outcomes to their patients. This success is well documented by 130 peer-reviewed papers and a 98.7% cumulative survival rate.

• Triple-lead threads are designed to achieve intimate bone contact at implant placement.

• The soft-bone surgical protocol enables both bone compression and provides additional stability in poor quality sites.

• In dense bone, the stepped finishing drill enables apical bone engagement for initial stability.

• High degree of bone-to-implant contact (BIC) and osteoconductive capacity.

• Successful clinical results under immediate loading conditions.

The LOCATOR® System for overdentures with implants

It features a drastically reduced vertical height for patient comfort when extracting the prosthesis, as well as higher prosthesis resistance.

• The drastically reduced vertical height of the LOCATOR attachment provides comfort to the patient when the prosthesis is extracted.

• Proven RBM roughened texture along the entire length of the implant.

• Self-tapping for ease of insertion and increased stability.

• Available in 2.4 and 2.9 mm diameters, and 10, 12 or 14 mm lengths for placement in all crests.

* Product available in the Caribbean

Tapered Implant Surgical Kits and Components Assembly (QNTSK)

Tapered Implant Surgical Kits and Components Assembly – Premium QNTSK Kit

• Tapered implant surgical tray • Tapered implant dense bone tap kit
Note: Tapping in dense bone is required. Exceeding an insertion torque of more than 90 Ncm may deform or strip the driver tip or the implant’s external hex, and may possibly delay the surgical procedure. Please refer to the Surgical Manual.
* Product available in the Caribbean and Costa Rica

TSV Surgical Kit

This is a unique temporary surgical block with all the instruments needed for implant placement. The Zimmer instrument kit system is conveniently adaptable to your individual needs.

• Everything is logically organized with an intuitive instrument flow that complements the surgical sequence for each implant diameter.

• Flexible. Simple. Convenient: for all individual needs and surgical styles.

• Temporary surgical block: a unique temporary surgical block allows for placement of a subset of instruments close within easy reach.

Short T3® implant surgical kit

Surgical kit
  • A compact kit with everything needed to place a T3 short implant
  • Specific instrumentation for T3 short implants
  • The drilling sequence undersizes the osteotomy in diameter by 1.15 mm
  • 5.0 mm diameter implants: Yellow Path
  • 6.0 mm diameter implants: Green Path
Flat bottom countersink shaping drill
  • Flat bottom countersink shaping drill for preparing an osteotomy that matches the size of the implant.
Dense bone taps ACT twist drills
  • Based on the standard-length ACT drills design
* Product available in the Caribbean
The Navigator® System for Guided surgery

Provides accuracy of pre-planning and implant placement for appropriate implant spacing in multiple-unit cases and with neighboring dentition.

• Angulation for improved restorative outcomes.

• Hex orientation for immediate provisionalization.

• Depth control for security when working near vital anatomy.

• Position control for soft tissue maintenance.

* Product available in the Caribbean and Costa Rica
Zimmer® Guided Surgery

Zimmer Dental offers solutions focused on predictability, reduced risk and enhanced outcomes:

  • 3D treatment planning of your Tapered Screw-Vent case.
  • Implant site preparation with the Zimmer Guided Surgery instrumentation.
  • Aesthetic restorations.

Minimum additional instruments needed for a guided surgery upgrade:

  • Updated Dríva™ drills in the main surgical kit and additional-length Dríva EG Drills in the Zimmer Drill Module designed to interface with selected surgical guides and provide depth control.
  • All four lengths of Dríva Drills fit in one instrument kit to accommodate both traditional and guided procedures.
  • Tube Adapters, included in the Zimmer Tube Adapter Kit, help to orient drills, facilitating positional and angulation control.


  • Compatibility with industry-leading case planning software and surgical guide manufacturers.

Particulate Allograft
Cortical Puros®

Building bones naturally.

• Multi-surface long-lasting regeneration.

• Clinical success.

• Remodels into a dense lamellar structure without sacrificing ridge contour and into natural viable bone with similar density to native bone.

• Safe and easy to use.

*Product not available in Costa Rica

Puros® Cancellous Particulate Allograft

The natural choice for healthy bone growth.

• Proven  and predictable regeneration.

•Natural and easy to use.

• Easy handling: quick hydration, five-year shelf life and room-temperature storage.

• Sterilized and preserved using the proprietary Tutoplast® process.

*Product not available in Costa Rica

Puros® Allograft particulate mix

The best of both worlds.

• The particulate Puros Allograft is an anatomic based mix of cortical and cancellous bone particulate.

•Easy handling: quick hydration, five-year shelf life and room-temperature storage.

• Safety and performance you expect from the Puros brand.

*Product not available in Costa Rica

Puros® Block Allograft

Changing the concept of block grafting

• Documented graft and implant success rates make it a viable alternative to autogenous block grafting.

• Saves time, helps to reduce pain and can shorten the patient’s rehabilitation period by eliminating the need to harvest an autogenous graft.

• Easy handling: quick hydration, five-year shelf life and room-temperature storage.

• Sterilized and preserved using the proprietary Tutoplast process, Puros Block Allograft offers a high-quality option for bone regeneration.

*Product not available in Costa Rica

Puros® Allograft Putty

Puros demineralized bone matrix (DBM) Putty with Chips

This moldable putty comprises 100% demineralized allograft and is sterilized using the proprietary Cancelle SP® DBM Sterilization Process. This process sterilizes DBM Putty and Putty with Chips while inactivating or removing bacteria, viruses, fungi and spores, but preserves the biological integrity and natural collagen structure of bone. Puros DBM Putty with Chips has both cancellous and cortical mineralized chips for osseoconductivity as well as osseoinductive potential.

*Product not available in Costa Rica

** Findings from an in vivo rat assay are not necessary predictive of human clinical results.

RegenaVate® DBM

RegenaVate DBM Fill contains demineralized bone matrix (DBM) in a porcine gelatin carrier. The DBM is “flowable” at 45°C and is a resilient solid at body temperature.

• Packaged in convenient syringes for ease of use.

• The DBM is tested for osseoconductivity* in a scientifically-proven in vivo rat assay.

• The clinician can control product consistency: gel, paste or putty.

• Flowable DBM provides unique handling flexibility.

*Product not available in Costa Rica

**These implants were evaluated in a human clinical study and were shown to induce bone formation. Each lot is tested using the athymic nude rat assay to verify osseoconductivity potential.

RegenerOss® Allograft Putty

Easy grafting!

• Ideal handling: the lecithin carrier provides a moldable vehicle for containing and transporting allograft bone granules.

• Osseoinductive and osseoconductive. RegenerOss Allograft Putty Plus is comprised of a mixture of DBM and mineralized allograft to facilitate the regeneration of new bone.

• Simple syringe delivery. The ergonomic design features a small diameter syringe with a curved tip for easy access to defect sites.

*Product not available in Costa Rica

RegenerOss® Resorbable Xenograft

RegenerOss Resorbable Xenograft – Porcine Anorganic Bone Mineral

• Carbonate Apatite Bone Graft Substitute: RegenerOss Resorbable Xenograft is a porcine-derived carbonate apatite intended for bone repair and regeneration for oral surgical procedures.

•Creating the right environment: RegenerOss Resorbable Xenograft is highly porous which allows in-growth of blood vessels that provide adequate supply of nutrients, delivery of cells and growth factors necessary for osseous tissue formation.

• Ideal Porous Osteoconductive Scaffold: The osteoconductive surface and porous structure of RegenerOss Resorbable Xenograft allow for new bone formation, both around and within the particle.

CopiOs® Cancellous Particulate Xenograft

A Xenograft treatment similar to Allograft

• CopiOs® Cancellous Particulate Xenografts are mineralized particulate cancellous bovine bone chips indicated for large and small bone defects.

• Alternative to autogenous bone: Sterilized and preserved using the proprietary Tutoplast Process, CopiOs Cancellous Particulate Xenografts offer a high-quality option for successful bone regeneration.

• Alternative to autogenous bone: CopiOs Cancellous Particulate Xenografts have been reported to be a viable alternative to autogenous bone grafts.

IngeniOs® HA Synthetic Bone Graf Substitutes

The longer-lasting* synthetic choice for bone regeneration.

IngeniOs HA is a next-generation, synthetic hydroxyapatite, with high porosity and surface area for osteointegration. It is an alternative to traditional hydroxyapatite products of human or bovine origin that provides long term volume stability.

• Augmentation of the atrophied alveolar ridge
• Highly stable implant beds
• Socket preservation
• Buccal wall defects
• Other multi-walled defects of the alveolar process
• Sinus lift

IngeniOs® β-TCP Bone Graft Substitute

The resorbable, synthetic choice for bone regeneration.

IngeniOs Silicated ß-TCP is an advanced silicated ß-TCP formulation of biocompatible, osteoconductive material for bone regeneration. The grafting material is made from synthetic, silicated pure-phase beta tricalcium phosphate, providing the potential for increased bioactivity and rapid scaffold mineralization.

• Socket preservation
• Augmentation or reconstructive treatment of the alveolar ridge
• Filling of intra-bony periodontal defects
• Filling of defects after root resection, apicoectomy and cystectomy
• Sinus lift/elevation of the maxillary sinus floor

Impression Coping

Pick-Up and Twist Lock™ Transfer Copings are available in the Certain internal connection design in three EP® (Emergence Profile) diameters and a straight diameter to match the corresponding healing abutment. The Impression Copings also “click” when properly seated. These copings have a different finger design that engages 2 mm internally into the implant, as compared to the abutment’s design that engages 4 mm deep into the implant.

PreFormance® Temporary Cylinders

Ease of use and versatility

• Components can be immediately customized to a patient’s anatomical profile. • Components are made of polymer material for easy preparation.

Prosthetic flexibility

• Available for implant and abutment-level provisional restorations. • Available in internal and external hex connections.

Temporary Cylinders

• Indicated for screw-retained restorations. • Knurled surface for mechanical retention of resin restorative material.

Titanium Temporary Cylinders

Material: Titanium alloy connection


• Single and multiple-unit screw-retained provisional restorations

• Minimum interarch space of 6 mm

• Maximum angulation of 15°

• Immediate non-occlusal loading of single-unit provisional restorations

• Multiple-unit restorations will require an evaluation of prosthesis support to minimize the load on the provisional abutments

• Occlusal loading of single and multiple-unit restorations of integrated implants for guided tissue healing

FlexLink ® TiBase

The FlexLink TiBase is designed for digital and traditional procedures with both screw- and cement-retained applications.

• Clinicians and laboratory partners require aesthetic solutions that provide restorative flexibility and implant/abutment connection strength. FlexLink TiBase can help clinicians achieve aesthetic restorations that can be sustained over time in various biotypes and challenging cases.

• The FlexLink TiBase solution combines the proven T3® surgical platform with a broad restorative portfolio to provide lab flexibility in treatment solution planning.

Low profile Abutments and Components

The solution designed to provide clinicians with more space.
Screw-retained restorations have a long history of documentation in implant dentistry. These abutments provide clearer access to, and retrievability of, single and multiple -unit implant restorations.
In addition, certain patient situations may require the benefits of screw-retained restorations such as full mouth reconstruction and immediate loading techniques

UCLA Abutments and Components

The UCLA Abutment is a castable abutment offered with a machined gold alloy base or in a fully castable version. It may be used for single or multi-unit screw or cement-retained restorations. It may correct angles up to 30 degrees when cast as a custom abutment.

• Single and multiple-unit restorations Machined Gold Alloy Cylinder With Plastic Unitube

• Minimum interarch space of 4 mm

• For aesthetic restorations when tissue is limited

GingiHue® Posts

* Designed to deliver optimal aesthetic results with ease of use

EP® (Emergence Profile) dimensions and a gold-colored titanium nitride coating provide for a natural blend with the soft tissue adjacent to the porcelain-fused-to-metal restorations.

Normally used for crowns and bridges

In areas of even soft-tissue margins, the GingiHue® abutment may only need minor adjustments for interocclusal clearance.

In areas of variable soft-tissue height, the GingiHue abutment may be prepared to follow gingival contours to maximize aesthetic outcomes and peri-implant soft-tissue health.

PreFormance® Posts

Ease of Use and Versatility

• Components can be immediately customized to a patient’s anatomical profile

• Components are made of polymer material for easy preparation

Prosthetic flexibility

• Available for implant and abutment-level provisional restorations

• Available in internal and external hex connections

PreFormance® Post

• For use with cement-retained restorations

• Available in straight or 15° pre-angled for easy angle correction

• Smooth surface for easy provisional reline

• Flat side for anti-rotation

BellaTek® Encode®Impression System

The BellaTek® Encode® Impression System provides optimized solutions to dentists by eliminating the need for implant level impressions, which streamlines the treatment process for the surgeon, restorative clinician and laboratory. In addition, patients have a better experience and a beautiful aesthetic outcome.

• Hard and soft-tissue maintenance: No need to remove the healing abutment, preserving tissue and resulting in aesthetic outcomes

• Customized treatment solutions: Choose a simple impression method above the gingiva to create aesthetic BellaTek Patient Specific Abutments in titanium and gold-colored titanium nitride

FOR TECHNICIANS – Zfx GenTek Restorations and Open Digital Workflows

The GenTek™ Restorative Components are the solution for anyone who uses genuine Zimmer Biomet Dental implants. As part of an open digital workflow, the genuine connection Ti-Bases and Pre-milled Abutment Blanks ensure the highest product quality and a precise fit through the integration of proven Zimmer Biomet Dental technologies. GenTek™ Restorative Components are available for Zimmer Holdings Certain ® implant systems Certain®, External Hex, TSV™ / Trabecular Metal™ and Eztetic®.


Part of a long tradition of excellence, Bien-Air contra-angles have DuaLook dual glass rod lighting, three separate Accu-Spray air/water sprays that ensure perfect nebulization, as well as the ultra-precise Accu-Chuck locking and drive technology. 

• CA 1:5 L Micro-Series

• CA 1:1 L Micro-Series

• CA 20:1 L Micro-Series / CA 20:1 L KM Micro-Series

• CA 1:5 l / CA 1:5

• CA 1:1 l / CA 1:1

The advantages of the electric hand piece over its air-driven counterpart are most apparent when measuring a dental practice’s efficiency and productivity. Because of its high cutting power and constant torque, the electric hand piece allows for procedures to be completed faster. The advantages of the electrical hand piece against its pneumatic equivalent are more evident when we measure the productivity and efficacy of dental practice. Due to its high cutting power and constant par, the electrical hand piece allows completing interventions at greater speed.

• Bi-directional action

• SmartLogic Control

• Ball bearings are greased for life

• Brushless technology

• CA 1:1 l / CA 1:1